Sooner or Later - Manual
Put Sooner or Later on any track, and previously frustrating timing becomes trivial!
See installation and activation instructions here.
Introduction
Slightly changing the timing of a track is beneficial in many ways, e.g.,
- Spread the envelope peaks:
- reducing the summed peak and the need to compress
- letting each peak contribute more to the sound
- Humanization: increase variations in the timing, creating a more human and natural sound.
The Controls
You can adjust all knobs by holding left-click and dragging up or down, and you can reset to the default value by double-clicking.
All changes have built-in smoothing, Sooner or Later won't add clicks even with aggressive changes.
The Offset knob
- shifts the track forward or backward in time, up to 10ms in either direction.
- default is 0.
The Fine Offset knob
- adds up to another 1ms shift for finer adjustment.
- default is 0.
The Gain knob
- lets you change the gain from -1 (invert the phase) to 1 (unchanged).
- default is 1.
The Bypass button
- turns on/off. When bypass is on, plugin is bypassed and this button is dimmer.
- depending on your DAW, this button may be synced with your DAW's bypass button.
Automation
Sooner or Later can easily make use of your DAW's automation or your connected controller. In most DAWs you can right click directly on the control you want to automate or connect.
See your DAW's documentation for details.
Resizing
If your DAW supports it, move your cursor to the bottom right corner of the plugin, then click and drag to resize it.
Specifications
- Plugin format: VST3
- Supported OS: Windows 10+ (64-bit), MacOS 13.3+ (native silicon support), Linux coming soon
- Channels: Stereo in, Stereo out
- Sample rates: Unrestrained
- Bit depth: 32-bit float or 64-bit double (host-negotiated)
- Latency: 11ms
- Oversampling: N/A
- Extremely lightweight on both CPU and memory, no extra minimum requirement on hardware.